Flexineb E3 Controller

The Flexineb E3 Controller is the power unit needed to operate the Flexineb E3 Cup. The
Flexineb E3 Controller is highly user friendly featuring a single-tap operating system, including 3
power levels. The unit is fully portable and rechargeable with a long-lasting battery life.

Features:

• Single-tap operating system featuring a single button
• LED battery life indicator
• 3 power levels
• Frequency: 90 kHz
• 6 hours battery life
• Rechargeable

Operation LEDs on the left side of the Controller indicate the selected power level. There are three user selectable power levels. The default power level is 1. The power level can only be changed immediately after the Controller is turned on. During the start- up fast blink LED period press the ON/OFF button again to select the desired power level. Once the selected power level LED changes to CONSTANT ON then the power level is set and nebulization begins.Pressing the button again will power the unit OFF.

Battery Indicator LEDs on the right side of the Controller indicate the battery level. During use you will see the Battery GREEN LED drop down through the levels. When the battery is low the bottom LED will eventually change from GREEN to RED to indicate charging is required. If the low battery RED LED is ignored then the bottom LED will eventually flash RED and power off the controller until charging is completed.

To charge the controller only use the Flexineb Charger. With the 9V charger plugged in the LEDs will roll to indicate the battery is charging. The top LED will stay ON CONSTANT when charging is complete. Depending on the battery level the time needed to fully charge the controller might vary.

To maintain the function of the electronic controller it must be used and stored in dry conditions.

To maintain the battery function it must be charged when the Battery LED turns Red.

CAUTION:
Do not immerse the controller in water or any liquid as this will permanently damage the electronics!

Battery Power:
Battery Type: 7.4V Li-ion rechargeable battery. Use the Flexineb supplied battery only. Use of another type of battery may present a risk of fire or explosion.
Operating Time: 6 hours from fully charged.

Battery Charging:
Use the Flexineb supplied charger only. Use of an alternative charger may present a risk of fire or explosion. A fully discharged battery can take 4 to 5 hours to reach full charge.

Mains Power Supply: (Input: 100 to 240v AC / 50 to 60 Hz)
The Flexineb E3 can also be operated using the Charger provided with the set. The same Charger charges the battery. Use the Flexineb Charger only. Use of an alternative Charger may present a risk of fire or explosion and void warranty.

Environmental Conditions:
Operating: 5° C to 45°C and up to 95% RH
Storage and Transportation: -20°C to +45°C and 15% to 95% RH

Flexineb E3 Controller (excluding battery): 24 months
Damage caused by improper handling or misuse is not covered by warranty. Use of an alternative Charger may present a risk of fire or explosion and void warranty.

Free Shipping
Delivery time: 5-10 working days
Contact customer support here for returns or inquiries related to your order